 |
 |
|
 |
| |
| Best viewed at 1024 x 768 resolution, Using Internet Explorer |
|
|
-NA-
| |
To Start Building Your Mosquito XE Helicopter send in your order form and
release waiver along with your deposit.
Complete Helicopter Kit Price: This is based on the USA price of $32000 USD and is converted here for your convenience32000 USD. Deposit $11,000 USD converts to approx 11000 USD
Save $2,000 USD converts to approx 2000 USD
Safety is paramount in aviation. Provide proof that you have had helicopter training from a certified instructor to at least the solo signoff, or a minimum of 10 hours dual instruction by the time of your purchase of the last group (Rotor System and Blades) and Innovator will discount the final price by 2000 USD to help pay for your training.
This discount applies to all current helicopter pilots.
Training brings your purchase price to only: $30,000 USD converts to approx 30000 USD
Factory painted - up to 3 colors Add $2000 USD converts to approx 2000 USD
Factory polish to a beautiful finish - Add $500 USD converts to approx 500 USD
Vertical tail fin (fiberglass) - Add $250 USD converts to approx 250 USD
Horizontal tail fin (fiberglass) - Add $250 USD converts to approx 250 USD
Ceramic Pistons - Add $125 USD converts to approx 125 USD
Mosquito seat cover - Add $150 USD converts to approx 150 USD
Governor - The M6000 EMS (Engine Management System) is available as a comple ready to install accessory for AIRs and XEs with MZ202 engines. The price is $1,200 USD plus shipping.
Wheel kit - Add $250 USD converts to approx 250 USD
Quick Build FAB parts - Add $275 USD converts to approx 275 USD
**** ASK YOUR DEALER ABOUT OUR DEALER / FACTORY BUILDER ASSIST PROGRAM ****
Delivery:
Delivery on complete kits is 6 months after receipt of downpayment. Additional delivery times
may apply depending on current factory back order. Delivery of kit groups is 2 months.
You can also order your Mosquito XE in Sub Groups
1. Airframe Kit and Builder's Set of Plans and Instructions $11,000 USD converts to approx 11000 USD . Deposit $5,000 USD converts to approx 5000 USD
This is the 1st kit group and includes the materials and components for building the composite airframe. This group consists of the composite enclosure, fuel tank, tail boom, landing gear and the full Builder's Set of Plans and Instructions. The kit is designed to meet the 51% rule. Construction time for this group is approximately 150 to 200 hours. When you have completed this group, you will have done most of the work required to finish the Mosquito XE/XEL Helicopter.
2. Control System Kit $3,500 USD converts to approx 3500 USD . Deposit $1,750 USD converts to approx 1750 USD
This is the 2nd kit package. It consists of the necessary materials and components to build and assemble the anti-torque pedals, cyclic, collective, torque tubes, push-pull tubes, swash plate, and rotor controls.
3. Drive System Kit $6,000 USD converts to approx 6000 USD . Deposit $3,000 USD converts to approx 3000 USD
The 3rd kit group is the power drive system consisting of primary and secondary reduction units, sprague clutch, engine coupling shafts, tail rotor drive shaft components, gear boxes, main rotor shaft, and associated bearings, couplings, etc.
4. Engine, Clutch, Instruments $6,000 USD converts to approx 6000 USD . Deposit $3,000 USD converts to approx 3000 USD
The 4th group includes the MZ202 engine, battery, centrifugal engine clutch, fuel tanks, fuel valves, fuel lines, throttle, switches, wiring, air speed indicator, dual engine CHT/EGT, dual engine /rotor tachometers and digital engine tachometer/hourmeter.
5. Rotor System Kit and Blades $6,000 USD converts to approx 6000 USD . Deposit $3,000 USD converts to approx 3000 USD
We highly recommend that you get some quality helicopter instruction before ordering this final group. With this group you will assemble the rotor heads, the tail rotor blades, and install the supplied main rotor blades. US Customers that qualify for our training discount will be able to purchase this group for $4000.00 with proof of training.
A packaging/insurance fee of $800 USD converts to approx 800 USD for the full kit or $600 USD converts to approx 600 USD for the airframe kit and $100 USD converts to approx 100 USD for each subsequent sub kit will apply.
Production may be subscribed to by filling out a dealer supplied orderform. and returning it with a deposit of $5,000 USD converts to approx 5000 USD for the Frame Kit, or $10,000 USD converts to approx 10000 USD for the full kit.
Ask your dealer for an Order Form today
| |
IMPORTANT: Before you purchase any part of the Mosquito Helicopter Kit you must be a responsible adult of legal age and understand that you are solely responsible for the safe manufacture, maintenance, and safe and legal operation of this experimental design. You must agree to hold all others, including Innovator Technologies, its owners, employees, and suppliers harmless in the event of injury, death, or damage to property. As the builder, YOU are fully responsible for the safety of your Mosquito. This is the same responsibility expected of any aircraft kit builder and operator. We want your time spent flying the Mosquito to be both fun and safe.
| |
|
|
 |
|
 |
| |  |
|
Mosquito Air
Mosquito Air Gallery
Video's
Thunder Beach, Florida
RotorFX Mosquito Training
VHPAF, Panama City, FL 
Mosquito Flight Adventures
